Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)

Product Details
Customization: Available
Type: Stainless Steel Strips
Standard: ASTM, AISI, GB, JIS, DIN, EN

360° Virtual Tour

Diamond Member Since 2012

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
100000 RMB
Plant Area
501~1000 square meters
  • Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
  • Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
  • Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
  • Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
  • Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
  • Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
Find Similar Products
  • Overview
  • Product Description
  • Detailed Photos
  • Product Parameters
  • Packaging & Shipping
  • Our Advantages
  • Company Profile
  • FAQ
Overview

Basic Info.

Model NO.
301
Certification
ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS
Shape
Round
Technique
Cold Rolled
Surface Treatment
Bright
Width
15mm-600mm
Coil ID
508/610
Coil Weight
5-20ton
Thickness
0.3-5.0mm
Stock Avialable
Yes
Transport Package
Standard Sea-Worhty Package
Specification
CE SGS
Trademark
TSTANDARD
Origin
China (Mainland)
HS Code
7208100000
Production Capacity
5000mt/M

Product Description

 
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)

Product Description

        As a lead manufacturer and supplier of steel coil stainless steel strip, our products such as stainless steel 201, 202 , 304 , 304L , 309S , 310 , 310S , 310L , 310H , 314, 316, 316L, 316Ti, 317, 317L, 321, 347, 347H , 409L , 420 , 430 , 434 , 444 , 904L , 2205 , 2304 , 2507 , 253MA ,254Mo , 631, 654MO ,17-7PH sheet plate are always available on stock. For cold rolled stainless steel sheet, thickness range from 0.3mm - 8.0mm, for hot rolled stainless steel plates, thickness range from 3.0-100mm.We have bulit strategetic partnership with TISCO, POSCO, BAOSTEEL, LISCO several years. Customers shouldn't have concern with our products, product could endure time. Section A: Type: 201, 202, 304, 304L, 309S, 310S, 310H , 314 ,316, 316L, 316Ti, 317, 317L, 347, 347H , 321, 409, 409L, 410 420, 430, 431, 444, 904L and 2205. Martensite: Ss 409, 409L, 410, 420, 430 sheet / plate; Austenite Cr-Ni -Mn: Ss 201 sheet, ss 202 sheet, J4 ss coil; Austenite Cr-Ni: SS 304 sheet, SS 304L sheet, SS 309S
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)

Detailed Photos

Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
 
1. Architectural decoration.
Stainless steel coils can be used to make various building decorative materials, such as wall panels, ceilings, floor panels, etc. Stainless steel coils have excellent anti-corrosion and wear resistance and can be used for indoor and outdoor decoration.










2. Furniture manufacturing.
Stainless steel coils can be used to make various furniture, such as chairs, tables, cabinets, etc. Stainless steel coils have high strength and corrosion resistance, which can enhance the stability and durability of furniture.
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
3. Kitchen utensils.
Stainless steel coils can be used to make various kitchen utensils, such as cookware and tableware. Stainless steel coils have the characteristics of being less prone to rust, easier to clean, and resistant to high temperatures, which can ensure the safety and health of food.
4. Medical equipment.
Stainless steel coils can be used to make various medical equipment, such as surgical instruments, medical vehicles, medical facilities, etc. Stainless steel coils have high hygiene and corrosion resistance, which can ensure the safety and reliability of medical equipment.
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)



Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)Product measurement
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)

Product Parameters

1 commodity 1.4541/SUS 321 ss coil & roll 
2 material 201, 202, 304, 304L, 316, 316L, 309S, 310S, 317L, 321, 409, 409L, 410, 420, 430, etc
3 surface 2B, BA, HL, 4K, 6K, 8KNO. 1, NO. 2, NO. 3, NO. 4, NO. 5, and  so  on
4 standard AISI, ASTM, DIN, EN, GB, JIS, etc
5 specification (1)    Thickness:   0.3mm-  100mm
(2)    width: 1000mm, 1250mm, 1500mm, 1800mm, 2000mm, etc
(3)    length: 2000mm, 2440mm, 3000mm, 6000mm, etc
(4)    The  specifications  can  be  provided  as  clients'   requirement.
6 application  (1)    Construction, decoration
(2)    petroleum, chemical  industry
(3)    electrical  appliances, automotive, aerospace
(4)    house  ware, kitchen  appliances, cutlery, foodstuff
(5)    surgical  instrument
7 advantage (1)    High  surface  quality, clean, smooth  finish
(2)    Good  corrosion  resistance, durability  than  ordinary  steel
(3)    High  strength  and  to  deform
(4)    Not  easy  to  be  oxidized
(5)    Good  welding  performance
(6)    The  use  of  diversity
8 package Bundles,   seaworthy  wooden  pallets  or  wooden  cases. With  or  without  edge  protector,   steel  hoop  and  seals,   in  20'   or  40'   container  or  as  per  customers'   requirements.
9 delivery within  20  working  days  since  we  get  the  deposit,
mainly  according  to  your  quantity  and  the  ways  of  transportation.
10 payment T/T, L/C
11 shipment FOB/CIF/CFR
12 note We  can  supply  other  grade  products  as  customers'   requirement.
Surface Finish Code Description
Mill finishes  
1D Hot rolled, heat treated, pickled. The most common hot rolled finish. A non reflective, 
rough surface. Not normally used for decorative applications
2B Cold rolled, heat treated, pickled, pinch passed. The most common cold rolled mill finish. 
Dull grey slightly reflective finish. Can be used in this condition or frequently is the starting
 point for a wide range of polished finishes.
2D Cold rolled, heat treated, pickled.
2H Work hardened by rolling to give enhanced strength level. Various ranges of tensile or 
0.2% proof strength are given in EN 10088-2 up to 1300 MPa and 1100 MPa respectively
 dependent on grade
2Q Cold rolled hardened and tempered. Applies to martensitic steels which respond to this
 kind of heat treatment.
2R Cold rolled and bright annealed, still commonly known as BA. A bright reflective finish. 
Can be used in this condition or as the starting point for polishing or other surface treatment 
processes e.g. colouring
  In the following codes "1" refers to hot rolled being the starting point and "2" as cold rolled
Special Finishes  
1G or 2G Ground. Relatively coarse surface. Unidirectional. Grade of polishing grit or surface
 roughness can be specified
1J or 2J Brushed or dull polished. Smoother than 1G/2G. Grade of polishing grit or surface roughness 
can be specified
1K or 2K Satin polish. Similar to 1J/2J but with maximum specified Ra value of 0.5 micron. Usually
 achieved with SiC polishing belts. Alumina belts are strongly discouraged for this finish as 
this will have detrimental effect on corrosion resistance. Recommended for external 
architectural and coastal environments where bright polish (1P/2P) is not acceptable.
1P/2P Bright polished. Non-directional, reflective. Can specify maximum surface roughness. The
 best surface for corrosion resistance.
2L Coloured by chemical process to thicken the passive layer and produce interference 
colours. A wide range of colours is possible.
1M/2M Patterned. One surface flat.
1S/2S Surface coated e.g. with tin = Terne coating
2W Corrugated. Similar to patterned but both surfaces are affected
Bead blasting Not in EN 10088-2. Work being undertaken to more accurately define finishes.

Packaging & Shipping

Production workshop
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
Shipping
Shipped in 7 days after payment.
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)

Our Advantages

Customized service : 

1.We are exporters and manufacturers of high-quality metal products in China.
2. We can provide a complete set of metal products for different markets.
3. We have the ability to serve customers with the most reliable quality and reasonable prices. 
4. We can OEM and produce products based on the given design, and mass produce the designed goods.
5. We regularly export to buyers around the world. These products are widely popular in the market.
6. We hope to win more customers with high-quality products and reasonable prices.

20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter
40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter
40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter

How to make the order ?
Δ First step , Please contact with our sales team , talked about the cargo details , if need sample , we can supply the sample for free ;
Δ If the sample can reach to requirement , the client can sign the contract with our company;
Δ Before shipment , client can inspect the cargo loading and seal the container , we also can accept inspection of the third party ( Such as SGS ,BV etc ) ;
Δ After 5 days of shipment , we will send the documents of customs clearance to you ;
Δ  After get the cargo , please give feedback to us ;

Customer feedback
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)

Company Profile

                  Shandong Standard Metal Products Co., Ltd. is a comprehensive company specializing in the production of alloy metal materials, X-ray protection equipment, and laser devices. At present, 70% of our products are exported to various parts of the world, and our key products have entered key fields and new industries such as nuclear power plants, petroleum, chemicals, shipbuilding, containers, railways, automobiles, urban light rail transportation, and large power plants.
         Our business ideas are focus on high quality material , meantime supply good before -sale and after-sale service , give most benefit to our clients .Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction We have built strategic partnership with domestic huge manufacturer, Baosteel , TISCO, ZPSS, TPCO, . If you are interested in learning more details about our products, contact us freely. We wish to extend our warm welcome to our customers, old and new, both at home and abroad, to negotiate business with us on the basis of equality and mutual benefit.
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)Customer visits
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)
A Factory Tour
Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)

FAQ

Q1. Where is your factory ?

A1: Our company's processing center is located in Shandong , China. Which is well equipped with kinds of machines, such as laser cutting machine, mirror polishing machine and so on.We can provide a wide range of personalized services according to the customers' needs.

Q2. How do you control quality ?

A2: First step , Please contact with our sales team , talked about the cargo details , if need sample , we can supply the sample for free ; If the sample can reach to requirement , the client can sign the contract with our company;Before shipment , client can inspect the cargo loading and seal the container , we also can accept inspection of the third party ( Such as SGS ,BV etc ) ;

Q3. What are the advantages of your company ?

A3: We have many professionals, technical personnel, more competitive prices and best after-dales service than other seamless lead product companies.

Q4. Can you arrange the shipment ?

A4: Sure we can help you with the shipment. We have forwarders who have cooperated with us for many years

Q5. How about the delivery time ?

A5: It is based on the order, After 5 days of shipment , we will send the documents of customs clearance to you ;After get the cargo , please give feedback to us ;

 

Ss 301 304 304L 316 Strip (Full Hard Half Hard 3/4 hard)





 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier