LISCO Sheet Stainless Steel 202 With PE Protective Film Grade 202 stainless steel is a type of Cr-Ni-Mn stainless with similar properties to A240/SUS 302 stainless steel. The toughness of grade 202 at low temperatures is excellent.
It is one of the most widely used precipitation hardening grades, and possesses good corrosion resistance, toughness, high harness, and strength.
The machinability of grade 202 stainless steel produces long, gummy chips. Machining can also be performed in the annealed condition. For heat treatment, the material has to be soaked at 1038°C (1900°F) for 30 min and cooled below 16°C (60°F) for full martensite transformation. The material can be welded by common fusion and resistance methods; however, this steel should not be joined using oxyacetylene welding method. The recommended filler metal is AWS E/ER630. Forging can be done by pre-soaking for 1 h at 1177°C (2150°F). Forging below 1010°C (1850°F) is not advisable.
1). AISI 202 stainless steel plate Application:
Because of good malleability and resistance to rust, 202 ss plate/sheet can be used for the following areas: Deep drawing utensils, water filters, storage devices, milk cans, water tank; Washing machine drum, microwave, dishwasher; Window and door frames, pillars of the package layer, the bus stop, telephone booth, pipe, decorative pipes; Automotive, tire cover, wiper, accessories, etc.
Thickness: 0.3mm-3.0mm(cold rolled), 3.0mm-80mm(hot rolled)
Width: 1000mm, 1219mm, 1250mm, 1500mm, 1800mm, 2000mm, etc
Length: 2000mm, 3000mm, 6000mm, etc
We can customize as your requirements.
3). Surface finish:
2B, BA, HL, 4K, 6K, 8K
No.1, No.2, NO. 3, NO.4, NO.5 or as requested
4). Technology: Cold rolled/hot rolled
5). Quality: Prime quality
6). Weight of coil: As per actually calculation
Excellent resistance to acid, heat, corrosion and decorative effect.
Welcome to pay a visit to our company website
| ASTM 202 stainless steel plate Chemical Composition |
|ASTM(202)||Yield Strength Mpa||Tensile Strength Mpa||Elongation (%)||Thickness|
|≥ 205||≥ 550||40||≤ 217||≤ 95|
|ASTM (202)||Weldability||Malleability||ERICCSON (cupping value)|