| Customization: | Available |
|---|---|
| Type: | Copper Pipe |
| Application: | Air Condition or Refrigerator, Water Tube, Water Heater, Oil Cooler Pipe |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This capillary has good conductivity, thermal conductivity, corrosion resistance, and processing performance. Commonly used in equipment that conducts electricity, conducts heat, and corrodes, it has low conductivity, thermal impurities, and high oxygen content. It is only made of general copper, such as electrical switches, pads, nails, pipes, and other pipeline welding. It has good cold bending performance and can be used to restore the environment. It is mainly used for supplying pipelines, and occasionally also for supplying pipes, plates, belts, and wires. It is mostly used in the manufacturing of various conveying pipes, condenser pipes, evaporators, heat exchangers, etc. High purity, good conductivity, and good thermal conductivity, commonly used in electric vacuum equipment, instruments, and equipment with good wear resistance, electrical contact, and corrosion resistance.
The brass tube with low strength, thermal conductivity, good electrical conductivity,and H96 performance is similar, the strength is slightly higher, can be plated metal, all kinds of water supply and drainage pipe, double metal pieces and medals, art, etc.High strength, plastic good, suitable for cold, heat processing welding and good corrosion resistance, condensation and heat pipe, coil, siphon, cooling equipment parts,And H85 similar performance, high strength, good plasticity, corrosion resistance is higher, thin wall pipe, corrugated pipe network and housing construction supplies Good plasticity, high strength, good machinability, welding, corrosion resistance, heat exchanger, paper making, machinery, electronic parts,The performance is very similar to H70, but the cold work has the tendency of "seasonal crack", complex cold punching and deep drawing, such as corrugated pipe.Have good mechanical properties, can withstand the cold and heat processing, for the production of daily necessities, hardware, screws and other parts,Have good mechanical properties, thermal plasticity good, good cutting, welding, good corrosion resistance, deep extension and bending fracture mechanical parts, such as pin, nut, a pressure meter spring, heat dissipation, annular parts Is a widely used lead brass, with good mechanical energy, is good machinability, can withstand cold and hot pressure processing, suitable for cutting and stamping processing of various structural parts, such as gaskets, bushing, etc.
Product Variety
Other types of lead products
Product specifications
1. Alloy: C28000 , C28200 ,C28300 , C28310 , C28320 , C28330 , C28500 , C23000 , C23030 , C23400 , C24000 , C24080 , C25000 , C25600 ,C26000 , C26100 ,C26130 ,C26200 , C26380 , C27000 , C27200 , C27400 ,C27450 , C27451 ,C27453 ,C2300 ,Cuzn15 ;
Copper-Zinc Leaded Alloys ( Leaded Brasses ) C30000-C39999 ;
C31000 , C31200 ,C31400 ,C31600 ,C32000 , C32500 , C32510 , C33000 , C33100 , C33200 , C33500 , C33530 , C34000 , C34200 , C34400 , C34500 , C34700 , C34800 , C34900 , C35000 , C35300 , C35330 , C35340 , C35350 , C35600 , C36000 , C36010 , C36200 , C36300 , C36500 , C36600 , C36700 , C36800 , C37000 , C37100 , C37700 , C37710 , C37800 , C38000 , C38010 , C38500 , C38510 , C38590 , C38600 ;
2. Size range:
Outside diameter from 10.3 mm to 114mm
Wall thickness from 1.57mm to 6.35mm
Length from 0.2m to 50m
3. Temper: Hard temper, half hard temper, soft annealed temper
4. Type: Copper pipe in pancake coil, copper pipe in level wound coil, copper pipe in straight tube
5. Packing:
Carton and pallet packing for copper pancake coil
Bundle and wooden case packing for straight copper pipe
Reel and pallet packing for level wound copper coil
6. Our standard:
ASTM B280, EN 12735-1, AS 1571, JIS H3300 standard-copper tube for air conditioning and refrigeration
ASTM B88, EN 1057, AS 1432 standard-copper tube for water and gas
ASTM B837 standard-copper tube for natural gas and LP gas
ASTM B819, EN 13348 standard-copper tube for medical gas
7. Delivery time: 2-3 weeks
8. Payment: T/T or L/C sight
Brass is a term that refers to a wide range of copper-zinc alloys with different properties
that include machinability, strength, hardness, wear-resistance, ductility, corrosion-resistance, antimicrobial, electrical and thermal conductivity and color.
Brasses are available in a wide range of colors such as yellow, red, silver and gold etc. These colored brasses, which can be easily shaped, are used by designers and architects in order to improve the inside and outside appearances of buildings.
UNS C23000 brass alloys are red in color and stronger than C22000 alloys. The following datasheet provides an overview of UNS C23000 red brass alloys.
Chemical Composition
The chemical composition of UNS C23000 red brass alloys is outlined in the following table.
| Element | Content (%) |
| Cu | 85 |
| Zn | 15 |
Properties |
Metric | Imperial |
| Tensile strength | 269-724 MPa | 39-105 ksi |
| Yield strength | 69-434 MPa | 10-70 ksi |
| Elongation | 55% | 55% |
| Poisson's ratio | 0.34 | 0.34 |
| Elastic modulus | 117 GPa | 16969 ksi |
| ASME B16.22 | ASTM B134 | ASTM B687 | ASTM B111 |
| ASME B16.29 | ASTM B135 | ASTM B698 | ASME SB543 |
| ASME SB111 | ASTM B359 | MIL T-20168 | ASTM B587 |
| ASME SB359 | ASTM B36 | QQ W321 | ASTM B543 |
| ASME SB395 | ASTM B395 | SAE J461 | |
| ASME SB43 | ASTM B43 | SAE J463 | |
| Specifications(mm) | Unit weight (g) |
O. D (mm) |
I. D (mm) |
Bottom Wall Thickness TW(mm) | Fin Groove Depth HF (mm) | TotalWallThickness (mm) |
Apex Angle | Helix Angle | Number of Tooth |
| Φ 5.00× 0.20+0.15-18° | 33 | 5.00 | 4.30 | 0.2 | 0.15 | 0.35 | 40 | 18 | 40 |
| Φ 7.00× 0.25+0.10-15° | 52 | 7.00 | 6.30 | 0.25 | 0.10 | 0.35 | 40 | 15 | 65 |
| Φ 7.00× 0.25+0.18-18° | 57 | 7.00 | 6.14 | 0.25 | 0.18 | 0.43 | 40 | 18 | 50 |
| Φ 7.00× 0.25+0.22-16° | 58 | 7.00 | 6.06 | 0.25 | 0.22 | 0.47 | 22 | 16 | 54 |
| Φ 7.00× 0.27+0.15-18° | 60 | 7.00 | 6.16 | 0.27 | 0.15 | 0.42 | 53 | 18 | 60 |
| Φ 7.94× 0.25+0.18-18° | 65 | 7.94 | 7.08 | 0.25 | 0.18 | 0.43 | 40 | 18 | 50 |
| Φ 7.94× 0.25+0.20-18° | 66 | 7.94 | 7.04 | 0.25 | 0.20 | 0.45 | 40 | 18 | 50 |
| Φ 7.94× 0.26+0.17-18° | 66 | 7.94 | 7.08 | 0.26 | 0.17 | 0.43 | 40 | 18 | 50 |
| Φ 7.94× 0.28+0.20-18° | 72 | 7.94 | 6.98 | 0.28 | 0.20 | 0.48 | 40 | 18 | 50 |
| Φ 7.94× 0.30+0.20-18° | 76 | 7.94 | 6.94 | 0.3 | 0.20 | 0.50 | 40 | 18 | 50 |
| Φ 9.52× 0.27+0.16-18° | 82 | 9.52 | 8.66 | 0.27 | 0.16 | 0.43 | 30 | 18 | 70 |
| Φ 9.52× 0.28+0.12-15° | 80 | 9.52 | 8.72 | 0.28 | 0.12 | 0.40 | 53 | 15 | 65 |
| Φ 9.52× 0.28+0.15-18° | 83 | 9.52 | 8.66 | 0.28 | 0.15 | 0.43 | 53 | 18 | 60 |
| Φ 9.52× 0.28+0.15-25° | 88 | 9.52 | 8.66 | 0.28 | 0.15 | 0.43 | 90 | 25 | 65 |
| Φ 9.52× 0.28+0.20-18° | 85 | 9.52 | 8.56 | 0.28 | 0.20 | 0.48 | 25 | 18 | 55 |
| Φ 9.52× 0.28+0.20-18° | 88 | 9.52 | 8.56 | 0.28 | 0.20 | 0.48 | 40 | 18 | 60 |
| Φ 9.52× 0.30+0.20-18° | 90 | 9.52 | 8.52 | 0.3 | 0.20 | 0.50 | 30 | 18 | 60 |
| Φ 9.52× 0.30+0.20-18° | 94 | 9.52 | 8.52 | 0.3 | 0.20 | 0.50 | 53 | 18 | 60 |
| Φ 9.52× 0.34+0.15-25° | 104 | 9.52 | 8.54 | 0.34 | 0.15 | 0.49 | 90 | 25 | 65 |
| Φ 9.52× 0.40+0.25-18° | 123 | 9.52 | 8.22 | 0.4 | 0.25 | 0.65 | 40 | 18 | 60 |
| Φ 12.00× 0.36+0.25-18° | 140 | 12.00 | 10.78 | 0.36 | 0.25 | 0.61 | 40 | 18 | 70 |
| Φ 12.70× 0.35+0.25-18° | 155 | 12.70 | 11.50 | 0.35 | 0.25 | 0.60 | 53 | 18 | 70 |
| Φ 12.70× 0.40+0.25-18° | 170 | 12.70 | 11.40 | 0.4 | 0.25 | 0.65 | 53 | 18 | 70 |
| Φ 12.70× 0.50+0.25-18° | 201 | 12.70 | 11.20 | 0.5 | 0.25 | 0.75 | 53 | 18 | 75 |
| Φ 12.75× 0.36+0.21/0.25-20° | 150 | 12.75 | 11.53 | 0.36 | 0.25 | 0.61 | 48 | 20 | 70 |
| Item | Copper tube ,Brass tube,Bronze tube |
| Type | Straight copper pipe,Pancake coil copper pipe,Capillary copper pipe |
| Standard | GB/T1527-2006,JIS H3300-2006,ASTM B75M,ASTMB42,ASTMB111,ASTMB395, |
| ASTM B359,ASTM B188,ASTM B698,ASTM B640,etc | |
| Material | T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920, |
| TP1,TP2,C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, | |
| TU1,TU2,C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, | |
| C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000,C44300, | |
| C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70600,C70620,C71000, | |
| C71500,C71520,C71640,C72200,etc | |
| Shape | Round,Square,Rectangular,Oval,half-round |
| Round | OD:2-914mm (1/16"-36") WT:0.2-120mm(SCH5S-SCH160S) |
| Square | Size:2*2-1016*1016mm(1/16"-40") WT:0.2-120mm |
| Rectangular | Size:2*4-1016*1219mm(1/16"-48") WT:0.2-120mm |
| Length | 1m,2m,3m,6m,or as required |
| Hardness | 1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
| Surface | mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required |
| Application | 1. Pancake Coil for ACR, General Engineering Applications |
| 2. LWC Coil for ACR, General Engineering Applications | |
| 3. Straight Copper Tubes for ACR and Refrigeration | |
| 4. Inner-grooved copper tube for ACR and Refrigeration | |
| 5. Copper Pipe for Transportation System of water, gas and oil | |
| 6.PE-coated copper tube for water/gas/oil transportation system | |
| 7.Semi-finished Copper tube for industrial applications |
The brass pipe specifications:
The main Picture of our products:
The grade of our brass pipe:
The Chemical Composition of the brass pipes:
Packaging:
Standard Sea-worthy package , fixed by belt then loaded into fumigated wooden box .
| 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter | ||||||
| 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter | ||||||
| 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter |
Product production workshop
Shipping:
7-10 day against the payment
Customized service :
1.We are exporters and manufacturers of high-quality metal products in China.
2. We can provide a complete set of metal products for different markets.
3. We have the ability to serve customers with the most reliable quality and reasonable prices.
4. We can OEM and produce products based on the given design, and mass produce the designed goods.
5. We regularly export to buyers around the world. These products are widely popular in the market.
6. We hope to win more customers with high-quality products and reasonable prices.
| 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter | ||||||
| 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter | ||||||
| 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter |
How to make the order ?
Δ First step , Please contact with our sales team , talked about the cargo details , if need sample , we can supply the sample for free ;
Δ If the sample can reach to requirement , the client can sign the contract with our company;
Δ Before shipment , client can inspect the cargo loading and seal the container , we also can accept inspection of the third party ( Such as SGS ,BV etc ) ;
Δ After 5 days of shipment , we will send the documents of customs clearance to you ;
Δ After get the cargo , please give feedback to us ;
Customer feedback
Customer visits
Q1. Where is your factory ?
A1: Our company's processing center is located in Shandong , China. Which is well equipped with kinds of machines, such as laser cutting machine, mirror polishing machine and so on.We can provide a wide range of personalized services according to the customers' needs.
Q2. How do you control quality ?
A2: First step , Please contact with our sales team , talked about the cargo details , if need sample , we can supply the sample for free ; If the sample can reach to requirement , the client can sign the contract with our company;Before shipment , client can inspect the cargo loading and seal the container , we also can accept inspection of the third party ( Such as SGS ,BV etc ) ;
Q3. What are the advantages of your company ?
A3: We have many professionals, technical personnel, more competitive prices and best after-dales service than other seamless lead product companies.
Q4. Can you arrange the shipment ?
A4: Sure we can help you with the shipment. We have forwarders who have cooperated with us for many years
Q5. How about the delivery time ?
A5: It is based on the order, After 5 days of shipment , we will send the documents of customs clearance to you ;After get the cargo , please give feedback to us ;
){kind=link}