| Customization: | Available |
|---|---|
| Type: | Stainless Steel Sheets |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product measurement
Section A:
Type: 201, 202, 304, 304L, 309S, 310S, 310H , 314 ,316, 316L, 316Ti, 317, 317L, 347, 347H , 321, 409, 409L, 410 420, 430, 431, 444, 904L and 2205.
Martensite: Ss 409, 409L, 410, 420, 430 sheet / plate;
Austenite Cr-Ni -Mn: Ss 201 sheet, ss 202 sheet, J4 ss coil;
Austenite Cr-Ni: SS 304 sheet, SS 304L sheet, ss 309S sheet, ss 310S plate;
Austenite Cr-Ni -Mo: Stainless steel 316 plate, stainless steel 316L plate;
Super Austenitic: 904L Stainless steel sheet , 2205 stainless steel sheet ,253MA stainless steel plate 254SMO stainless steel plate , 654MO stainless steel Plate,
| Finish | Description |
| 2D | A matt non-refective finish produced by cold rolling followed by annealing and descaling. The dull finish may result from the pickling operation or rolling on dull rolls |
| 2B | A bright, moderately reflective cold rolled with the annealed and descaled coil receiving a final light pass through polished rolls. This is the general purpose cold rolled finish that can be used as is, or as a preliminary step to polishing. 2B is the most commonly used surface finish |
| BA | Bright annealed is offered by many stainless steel producers, and is referred to as BA or No. 2BA. A bright annealed finish approaches a mirror-like appearence. It is produced by cold rolling, then annealing in a controlled atmosphere furnace. The final appearence is developed by a single light skin pass through a cold mill over highly polished rolls, but is also dependent on additional millwork, such as grinding the surface at an intermediate gauge. A bright annealed finish is often specified for architectural applications and for other uses where a reflective surface is desired on the as fabricated part. Some "milkiness" in the finish makes a BA finish not as reflective as No. 8. Typical uses include appliance trim, architectural components, cookware, food processing equipment |
| No.4 | No.4 finish is a general purpose polished finish widely used for restaurant equipment, shop fronts and dairy equipment. Following initial grinding with coarse abrasives, final finishing generally is done with abrasives having a particle size of approximately 120 to 150 mesh |
| No.8 | ?No. 8* finish, the most relective finish that is commonly produced on sheet, is obtained by polishing with successively finer abrasives and buffing extensively with very fine buffing rouges. The surface is essentially free of grit lines from preliminary grinding operations. No. 8 finish is most widely used for architectural parts, small mirrors and reflectors and for press plates |
|
Name
|
Stainless steel coils
|
|||
|
Thickness
|
0.3mm--6mm(cold rolled) 3mm--16mm(hot rolled)
|
|||
|
Width
|
1000mm--2200mm
|
|||
|
Length
|
1000mm-6000mm, as customers' request
|
|||
|
Surface
|
BA/2B/NO. 1/NO. 3/NO. 4/8K/HL/2D/1D
|
|||
|
manufacture
|
Hot Rolled/Cold Rolled
|
|||
|
Packing
|
Packed in bundles with standard export sea-worthy package
|
|||
|
Delivery Time
|
Within 15 working days, according to customers' quantities
|
|||
|
Quality
|
High Quality. SGS inspection is accepted if needed
|
|||
|
Place of Origin
|
QingDao
|
|||
|
Productivity
|
500 MT/Month
|
|||
|
Payment
|
T/T, L/C
|
|||
|
MOQ
|
1 MT
|
|||
|
Application
|
Foodstuff, Gas, metallurgy, biology, electron, chemical etc.
|
|||
|
Note
|
We can also do other materials
|
|||
Production workshop
Shipping
Shipped in 7 days after payment.
Customized service :
1.We are exporters and manufacturers of high-quality metal products in China.
2. We can provide a complete set of metal products for different markets.
3. We have the ability to serve customers with the most reliable quality and reasonable prices.
4. We can OEM and produce products based on the given design, and mass produce the designed goods.
5. We regularly export to buyers around the world. These products are widely popular in the market.
6. We hope to win more customers with high-quality products and reasonable prices.
| 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter | ||||||
| 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter | ||||||
| 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter |
How to make the order ?
Δ First step , Please contact with our sales team , talked about the cargo details , if need sample , we can supply the sample for free ;
Δ If the sample can reach to requirement , the client can sign the contract with our company;
Δ Before shipment , client can inspect the cargo loading and seal the container , we also can accept inspection of the third party ( Such as SGS ,BV etc ) ;
Δ After 5 days of shipment , we will send the documents of customs clearance to you ;
Δ After get the cargo , please give feedback to us ;
Customer feedback
){kind=link}