| Customization: | Available |
|---|---|
| Usage: | Food Use, Kitchen Use, Pharmaceutical, Label & Tag |
| Type: | Roll |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
All the properties of lubricant used in food packaging aluminum foil must conform to conventional lubricating lubricant, which can reduce the friction and wear of all technical parameters required, and avoid corrosion, good thermal performance, sealing effect. In addition, they also need to meet the food regulations and biological inertia, that does not affect the taste, does not affect the odor, does not affect the color, in line with the international standards (TRIOA ORIGINAL).
Certification of food grade lubricant products are divided into three types: 3H, H1 and H2. The certification is responsible for the selection of the international body of (independent certification body).
3H grade lubricant: suitable for lubricant must be in contact with food occasions, such as: oven mold.
H1 grade lubricant: suitable for lubricant that are easy or cannot avoid contact with food.
H2 grade lubricant: suitable for occasions where there is no direct contact with food.
The production process of aluminum foil lunch box can be divided into six steps: material spreading, lubricating, feeding, punching forming and blanking. Aluminum foil in the production process by the pressure of up to 40~80 tons, punching frequency of 1~2 seconds, the average production capacity of 20 thousand / day, aluminum foil storage shelf life of 2 years. In this process, lubricant plays a very important role, including: heat, cooling, protection of aluminum foil surface protection, stamping equipment and tooling, anti rust, corrosion and prevent the bonding surface of the aluminum foil (adapted to pre coated well lubricated foil need to roll up the situation, such as aluminum foil lubricant market at present most) selection of food grade DOS lubricant, Germany, Henkel and Sasol lubricant.
Lubricant content:
Different aluminum foil material, lunch box type and size, the amount of lubricating lubricant is also different, the amount of lubricant required for the range of 20mg~300mg/ m2. If the lubricant volume is low, insufficient lubrication, easy deformation, damage output boxes or even scrapped; on the contrary, if the lubricant volume is high, excessive aluminum foil lubricant rolling lubrication, because the roll surface caused by extrusion, aluminum volume drop phenomenon, produce box easy to stick to the mold surface is not easy to blanking. Stop out, causing serious impact on production efficiency. At the same time, excessive lubrication is also a waste, improve production costs. Lubricating way according to the different lubrication requirements, there are two types of lubricant and double side lubricant. Single side lubricant is suitable for the simple type of lunch box, the small deformation of aluminum foil lubricant and the low requirement of lubricant, the lubricant filling mode must be strictly controlled to avoid unnecessary waste.
| Type | Thickness(mm) | Width(mm) | Surface | Alloy Grade |
| mill finished aluminum coil | 0.1-6.0mm | 20-2000mm | mill finished | 1050,1060, 1100,3003, 3004,5052, 5083,6061 etc. |
| aluminum coil with kraftpaper | 0.3-3.0mm | 1000,1200 | with kraftpaper | |
| Diamond aluminum coil | 0.3-2.0mm | 500-1250mm | diamond pattern | |
| Stucco aluminum coil | 0.2-2.0mm | 500-1400mm | stucco pattern | |
| color coated aluminum coil | 0.2-3.5mm | 170-1400mm | color coated |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Al |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | -- | -- | 0.03 | 0.03 | 99.6% | |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | -- | -- | 0.05 | 0.03 | -- | 99.5% |
| 1100 | 0.95 | 0.05~0.2 | 0.05 | -- | -- | -- | 0.1 | -- | -- | 99% | |
| 3003 | 0.6 | 0.7 | 0.05~0.2 | 1.0~1.5 | -- | -- | -- | 0.1 | -- | -- | Remainder |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.2~0.6 | 0.1 | -- | 0.25 | 0.1 | -- | Remainder |
| 3105 |
0.6 |
0.7 |
0.3 |
0.3~0.8 |
0.2~0.8 |
0.2 |
-- |
0.4 |
0.1 |
-- |
Remainder |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | -- | 0.1 | -- | -- | Remainder |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5~1.1 | 0.1 | -- | 0.25 | -- | -- | Remainder |
| 8011 | 0.5~0.9 | 0.6~1.0 | 0.1 | 0.2 | 0.05 | 0.05 | -- | 0.1 | 0.08 | -- | Remainde |
|
name
|
Aluminum sheet; Aluminum Plate
Alloy Aluminum Plate; Alloy Aluminum Sheet;
Aluminum Embossed Sheet 0.5~1mm;
Aluminum Roofing Sheet 0.5~1mm
|
|
1000 Series
|
1050, 1060, 1070 , 1050A , 1350 , 1145 ,1035 , 1100 , 1200 , 1235 ,
|
|
2000 Series
|
2011 , 2014 , 2014A , 2214 , 2017 , 2017A , 2117 , 2218 , 2618 , 2219 , 2024 , 2124 ,
|
|
3000 Series
|
3103 , 3004 , 3005 , 3105 , 3003,
|
|
5000 Series
|
5005, 5019 , 5050 , 5251 , 5052 , 5154 ,5454 ,5554 ,5754 , 5056 , 5356 , 5456 , 5082 , 5182 , 5083, 5183 , 5086,
|
|
6000 Series
|
6101 , 6101A , 6005 , 6005A , 6351 , 6060 , 6061 , 6063 , 6063A , 6070 ,6181 , 6082 ,
|
|
7000 Series
|
7003 , 7005 , 7020 , 7022 , 7050 , 7075 , 7475
|
|
Aluminum Sheet
|
|||||
|
Alloy
|
Thickness(mm)
|
Width(mm)
|
Length(mm)
|
Temper
|
DC or CC
|
|
1050,1060,1070,1100,
|
0.2-3.0
|
20-1850
|
1000-10000
|
O,H12,H22,H14,H24,H16,H26,H18,H32
|
DC, CC
|
|
1235
|
3.0-150
|
500-2200
|
H112,H111
|
DC
|
|
|
3003,3004,3105,
|
0.2-3.0
|
300-1850
|
1000-10000
|
O,H12,H22,H14,H24,H16,H26,H18,H32
|
DC, CC
|
|
3.0-150
|
900-1900
|
H112,H111
|
DC
|
||
|
5052 5083 5754 5005
|
0.2-3.0
|
300-1850
|
1000-10000
|
O,H12,H22,H14,H24,H16,H26,H18,H32,H36,H116,H112,H321
|
DC
|
|
3.0-400
|
900-2600
|
H112, H111
|
DC
|
||
|
6061 6063
|
1.0-400
|
300-1500
|
1000-10000
|
T6,T651
|
DC,
|
|
Packing
|
Export standard wooden pallets packing
|
||||
|
Application
|
Mainly in Construction, decoration, PCB materials, cover material, LCD back panel, refrigeration, air conditioner, automobile, etc
|
||||
|
MOQ
|
3-5MT
|
||||
|
Kind attention
|
Specifications can be customized as the customer ' s requirements
|
||||
Production workshopProduct packaging
Shipping
Shipped in 7 days after payment.
Customized service :
1.We are exporters and manufacturers of high-quality metal products in China.
2. We can provide a complete set of metal products for different markets.
3. We have the ability to serve customers with the most reliable quality and reasonable prices.
4. We can OEM and produce products based on the given design, and mass produce the designed goods.
5. We regularly export to buyers around the world. These products are widely popular in the market.
6. We hope to win more customers with high-quality products and reasonable prices.
| 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter | ||||||
| 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter | ||||||
| 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter |
How to make the order ?
Δ First step , Please contact with our sales team , talked about the cargo details , if need sample , we can supply the sample for free ;
Δ If the sample can reach to requirement , the client can sign the contract with our company;
Δ Before shipment , client can inspect the cargo loading and seal the container , we also can accept inspection of the third party ( Such as SGS ,BV etc ) ;
Δ After 5 days of shipment , we will send the documents of customs clearance to you ;
Δ After get the cargo , please give feedback to us ;
Customer feedback
){kind=link}