| Customization: | Available |
|---|---|
| Type: | Stainless Steel Strips |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product measurement
| 1 | commodity | 1.4541/SUS 321 ss coil & roll |
| 2 | material | 201, 202, 304, 304L, 316, 316L, 309S, 310S, 317L, 321, 409, 409L, 410, 420, 430, etc |
| 3 | surface | 2B, BA, HL, 4K, 6K, 8KNO. 1, NO. 2, NO. 3, NO. 4, NO. 5, and so on |
| 4 | standard | AISI, ASTM, DIN, EN, GB, JIS, etc |
| 5 | specification | (1) Thickness: 0.3mm- 100mm (2) width: 1000mm, 1250mm, 1500mm, 1800mm, 2000mm, etc (3) length: 2000mm, 2440mm, 3000mm, 6000mm, etc (4) The specifications can be provided as clients' requirement. |
| 6 | application | (1) Construction, decoration (2) petroleum, chemical industry (3) electrical appliances, automotive, aerospace (4) house ware, kitchen appliances, cutlery, foodstuff (5) surgical instrument |
| 7 | advantage | (1) High surface quality, clean, smooth finish (2) Good corrosion resistance, durability than ordinary steel (3) High strength and to deform (4) Not easy to be oxidized (5) Good welding performance (6) The use of diversity |
| 8 | package | Bundles, seaworthy wooden pallets or wooden cases. With or without edge protector, steel hoop and seals, in 20' or 40' container or as per customers' requirements. |
| 9 | delivery | within 20 working days since we get the deposit, mainly according to your quantity and the ways of transportation. |
| 10 | payment | T/T, L/C |
| 11 | shipment | FOB/CIF/CFR |
| 12 | note | We can supply other grade products as customers' requirement. |
| Surface Finish Code | Description | |
| Mill finishes | ||
| 1D | Hot rolled, heat treated, pickled. The most common hot rolled finish. A non reflective, rough surface. Not normally used for decorative applications |
|
| 2B | Cold rolled, heat treated, pickled, pinch passed. The most common cold rolled mill finish. Dull grey slightly reflective finish. Can be used in this condition or frequently is the starting point for a wide range of polished finishes. |
|
| 2D | Cold rolled, heat treated, pickled. | |
| 2H | Work hardened by rolling to give enhanced strength level. Various ranges of tensile or 0.2% proof strength are given in EN 10088-2 up to 1300 MPa and 1100 MPa respectively dependent on grade |
|
| 2Q | Cold rolled hardened and tempered. Applies to martensitic steels which respond to this kind of heat treatment. |
|
| 2R | Cold rolled and bright annealed, still commonly known as BA. A bright reflective finish. Can be used in this condition or as the starting point for polishing or other surface treatment processes e.g. colouring |
|
| In the following codes "1" refers to hot rolled being the starting point and "2" as cold rolled | ||
| Special Finishes | ||
| 1G or 2G | Ground. Relatively coarse surface. Unidirectional. Grade of polishing grit or surface roughness can be specified |
|
| 1J or 2J | Brushed or dull polished. Smoother than 1G/2G. Grade of polishing grit or surface roughness can be specified |
|
| 1K or 2K | Satin polish. Similar to 1J/2J but with maximum specified Ra value of 0.5 micron. Usually achieved with SiC polishing belts. Alumina belts are strongly discouraged for this finish as this will have detrimental effect on corrosion resistance. Recommended for external architectural and coastal environments where bright polish (1P/2P) is not acceptable. |
|
| 1P/2P | Bright polished. Non-directional, reflective. Can specify maximum surface roughness. The best surface for corrosion resistance. |
|
| 2L | Coloured by chemical process to thicken the passive layer and produce interference colours. A wide range of colours is possible. |
|
| 1M/2M | Patterned. One surface flat. | |
| 1S/2S | Surface coated e.g. with tin = Terne coating | |
| 2W | Corrugated. Similar to patterned but both surfaces are affected | |
| Bead blasting | Not in EN 10088-2. Work being undertaken to more accurately define finishes. | |
Production workshop
Shipping
Shipped in 7 days after payment.
Customized service :
1.We are exporters and manufacturers of high-quality metal products in China.
2. We can provide a complete set of metal products for different markets.
3. We have the ability to serve customers with the most reliable quality and reasonable prices.
4. We can OEM and produce products based on the given design, and mass produce the designed goods.
5. We regularly export to buyers around the world. These products are widely popular in the market.
6. We hope to win more customers with high-quality products and reasonable prices.
| 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter | ||||||
| 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter | ||||||
| 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter |
How to make the order ?
Δ First step , Please contact with our sales team , talked about the cargo details , if need sample , we can supply the sample for free ;
Δ If the sample can reach to requirement , the client can sign the contract with our company;
Δ Before shipment , client can inspect the cargo loading and seal the container , we also can accept inspection of the third party ( Such as SGS ,BV etc ) ;
Δ After 5 days of shipment , we will send the documents of customs clearance to you ;
Δ After get the cargo , please give feedback to us ;
Customer feedback
){kind=link}