3003 H24 Aluminum Stucco Coil with Polykraft

        All the properties of lubricant used in food packaging aluminum foil must conform to conventional lubricating lubricant, which can reduce the friction and wear of all technical parameters required, and avoid corrosion, good thermal performance, sealing effect. In addition, they also need to meet the food regulations and biological inertia, that does not affect the taste, does not affect the odor, does not affect the color, in line with the international standards (TRIOA ORIGINAL).
Certification of food grade lubricant products are divided into three types: 3H, H1 and H2. The certification is responsible for the selection of the international body of (independent certification body).
3H grade lubricant: suitable for lubricant must be in contact with food occasions, such as: oven mold.
H1 grade lubricant: suitable for lubricant that are easy or cannot avoid contact with food.
H2 grade lubricant: suitable for occasions where there is no direct contact with food.
The production process of aluminum foil lunch box can be divided into six steps: material spreading, lubricating, feeding, punching forming and blanking. Aluminum foil in the production process by the pressure of up to 40~80 tons, punching frequency of 1~2 seconds, the average production capacity of 20 thousand / day, aluminum foil storage shelf life of 2 years. In this process, lubricant plays a very important role, including: heat, cooling, protection of aluminum foil surface protection, stamping equipment and tooling, anti rust, corrosion and prevent the bonding surface of the aluminum foil (adapted to pre coated well lubricated foil need to roll up the situation, such as aluminum foil lubricant market at present most) selection of food grade DOS lubricant, Germany, Henkel and Sasol lubricant.
Lubricant content:
Different aluminum foil material, lunch box type and size, the amount of lubricating lubricant is also different, the amount of lubricant required for the range of 20mg~300mg/ m2. If the lubricant volume is low, insufficient lubrication, easy deformation, damage output boxes or even scrapped; on the contrary, if the lubricant volume is high, excessive aluminum foil lubricant rolling lubrication, because the roll surface caused by extrusion, aluminum volume drop phenomenon, produce box easy to stick to the mold surface is not easy to blanking. Stop out, causing serious impact on production efficiency. At the same time, excessive lubrication is also a waste, improve production costs. Lubricating way according to the different lubrication requirements, there are two types of lubricant and double side lubricant. Single side lubricant is suitable for the simple type of lunch box, the small deformation of aluminum foil lubricant and the low requirement of lubricant, the lubricant filling mode must be strictly controlled to avoid unnecessary waste.

 

1. Construction
Aluminum sheet is widely used in the construction industry, mainly used in building exterior walls, interior decoration, roof covering, door and window frames, ceilings, etc. The advantage of aluminum plate is that it is lightweight, easy to handle and install. At the same time, it also has very good sound insulation, heat insulation, durability and other properties, which can greatly improve the service life of the building.

 

2. Vehicle manufacturing
Aluminum sheets also have a wide range of applications in the vehicle manufacturing industry. It can be used to make car frames, body shells, wheel hubs, etc. Compared to the traditional steel body, the aluminum plate body is lighter, which can reduce the overall weight of the vehicle and improve fuel efficiency. At the same time, the aluminum plate also has good strength and heat resistance, which can ensure the stable operation of the vehicle in various harsh environments.

3. Medical device manufacturing
Aluminum sheets also have many uses in the manufacture of medical devices, such as surgical instruments, infusion bottles, etc. Instruments made of aluminum plates have good anti-corrosion properties and are easy to clean, which can ensure hygiene and safety in the medical process.

4. Electronics industry
Aluminum sheet also has a very important application in the electronics industry. It can be used to make housings, heaters, radiators, etc. for electronic products. In the working environment of high temperature and high pressure, electronic products made of aluminum plate are very stable and can ensure the long-term service life of electronic products.

Production workshop

Product packaging

Shipping
Shipped in 7 days after payment.

Customized service : 

1.We are exporters and manufacturers of high-quality metal products in China.
2. We can provide a complete set of metal products for different markets.
3. We have the ability to serve customers with the most reliable quality and reasonable prices. 
4. We can OEM and produce products based on the given design, and mass produce the designed goods.
5. We regularly export to buyers around the world. These products are widely popular in the market.
6. We hope to win more customers with high-quality products and reasonable prices.

How to make the order ?
Δ First step , Please contact with our sales team , talked about the cargo details , if need sample , we can supply the sample for free ;
Δ If the sample can reach to requirement , the client can sign the contract with our company;
Δ Before shipment , client can inspect the cargo loading and seal the container , we also can accept inspection of the third party ( Such as SGS ,BV etc ) ;
Δ After 5 days of shipment , we will send the documents of customs clearance to you ;
Δ  After get the cargo , please give feedback to us ;
Customer feedback