All the properties of lubricant used in food packaging aluminum foil must conform to conventional lubricating lubricant, which can reduce the friction and wear of all technical parameters required, and avoid corrosion, good thermal performance, sealing effect. In addition, they also need to meet the food regulations and biological inertia, that does not affect the taste, does not affect the odor, does not affect the color, in line with the international standards (TRIOA ORIGINAL).
Certification of food grade lubricant products are divided into three types: 3H, H1 and H2. The certification is responsible for the selection of the international body of NSF (independent certification body).
3H grade lubricant: suitable for lubricant must be in contact with food occasions, such as: oven mold.
H1 grade lubricant: suitable for lubricant that are easy or cannot avoid contact with food.
H2 grade lubricant: suitable for occasions where there is no direct contact with food.
The production process of aluminum foil lunch box can be divided into six steps: material spreading, lubricating, feeding, punching forming and blanking. Aluminum foil in the production process by the pressure of up to 40~80 tons, punching frequency of 1~2 seconds, the average production capacity of 20 thousand / day, aluminum foil storage shelf life of 2 years. In this process, lubricant plays a very important role, including: heat, cooling, protection of aluminum foil surface protection, stamping equipment and tooling, anti rust, corrosion and prevent the bonding surface of the aluminum foil (adapted to pre coated well lubricated foil need to roll up the situation, such as aluminum foil lubricant market at present most) selection of food grade DOS lubricant, Germany, Henkel and Sasol lubricant.
Different aluminum foil material, lunch box type and size, the amount of lubricating lubricant is also different, the amount of lubricant required for the range of 20mg~300mg/ m2. If the lubricant volume is low, insufficient lubrication, easy deformation, damage output boxes or even scrapped; on the contrary, if the lubricant volume is high, excessive aluminum foil lubricant rolling lubrication, because the roll surface caused by extrusion, aluminum volume drop phenomenon, produce box easy to stick to the mold surface is not easy to blanking. Stop out, causing serious impact on production efficiency. At the same time, excessive lubrication is also a waste, improve production costs. Lubricating way according to the different lubrication requirements, there are two types of lubricant and double side lubricant. Single side lubricant is suitable for the simple type of lunch box, the small deformation of aluminum foil lubricant and the low requirement of lubricant, the lubricant filling mode must be strictly controlled to avoid unnecessary waste.
Package & Loading
Standard Export Seaworthy Packing : With waterproof paper, metal belt pack sheet, put them in wooden pallet, put in container.
|1000 SERIES||1050 1060 1070 1100 1235representative series aluminum plate is also known as pure aluminum,|
in the series in 1xxx series belongs to all the alumina quantity
of a maximum number of series. Purity can achieve 99.00% above.
|3000 SERIES||3xxx series aluminum represents 3003 3004,3005, 3 A21 primarily. And can be called in the 3xxx series aluminum|
antirust aluminum production process more
outstanding. The 3xxx series aluminum plate is by manganese as the main component. Content at 1.0-1.5 between.
Is a rust-proof function better series. Conventional
application in the air conditioning, the refrigerator, such as car in damp environment
|5000 SERIES||5xxx series representatives 5052 5005 5083,5754. The 5000 series aluminum alloy aluminum belong to the more|
commonly used series, the main elements for
magnesium, with magnesium in the amount between 3-5%. And can be called aluminum magnesium alloy. Key features
for low density, high tensile strength,
elongation rate is high. In the same area under the weight of the magnesium alloy aluminum less than other series.
|6000 SERIES||6xxx series represents 6061 mainly contain magnesium and silicon of two elements, so focused on the 4000 series |
and the advantages of the 5000 series 6061
is a cold treatment aluminum forging products, apply to fight against corrosion, oxidizing demanding applications.
|8000 SERIES||8xxx series is relatively commonly used for 8011 belongs to other series. It is for major function cap of aluminum, |
also used in the radiator, most applications for
the aluminum foil.
The inner size of commonly used container is below:
20FT GP: 5.69mx 2.13mx 2.18m about 25MTS,24-26m³
40FT GP: 11.8mx 2.13m x 2.18m ;about 25MTS,54m³
40FT HG: 11.8m x 2.13m x 2.72m about 22MTS,68m³
Or as customers' requiremenets.
How to make an order?
· Sample approval
· Client make 30% deposit or open LC after confirming the PI
· Client visit our workshop to check quality or arrange Third-party to inspect the cargos.
· After passed Inspection, then we arrange shipment with shipping agent.
· Supplier arrange necessary documents and send copy of these documents
· Client remit balance payment
· Supplier send original documents or telex release the goods
· Quality warranty for 2year after shipment
After sales service
· After receive the goods, We hope to get your feedback at first time.
· We could provide installation guide, if you need, we could give you global service.
· Our Sales are 24-hours online for your request.
· We value every inquiry sent to us, ensure quick competitive offer.
· We cooperate with customer to bid tenders. Provide all necessory document.
· We are a sales team, with all techinical support from engineer team.
Welcome to contact with us!